12/30/2023 0 Comments Exhaust putty instructions![]() ![]() There is a pungent, sulphurous odour during the mixing process but Gorilla All Purpose Epoxy Stick is odorless once cured. ![]() It can be used in contact with potable water supply and will not leach contaminants into water supply.ĭoes Gorilla All Purpose Epoxy Stick have an odor? Gorilla All Purpose Epoxy Stick is NSF/ANSI 61 certified drinking water safe. Is Gorilla All Purpose Epoxy Stick drinking water safe? Wait at least 1 hour prior to turning water back.Smooth and feather the epoxy around the edges to ensure good contact. Press the putty inĪnd around the crack or hole to plug the area to be repaired. Make sure that the putty patch is at least 13mm larger than the size of the area to be repaired.What’s the best way to use Gorilla All Purpose Epoxy Stick for Plumbing applications? If a smooth finish is desired, once the epoxy is in place, smooth with wet gloved fingers as it.Thoroughly knead putty with fingers to a uniform colour (approx.To ease mixing, allow the putty to come to room temperature.For best results, use a clean set of disposable gloves for every.What’s the best way to apply Gorilla All Purpose Epoxy Stick? Replace film around the putty stick and ensure cap is secured tightly. Place foil sticker back on end of epoxy stick. Store the putty stick in the plastic vial after use & minimise air exposure. ![]() How should I store Gorilla All Purpose Epoxy Stick? Place foil sticker back on the end of the Epoxy Stick. Storage tips: Store the putty stick in the plastic vial after use and minimize air exposure.For cured/dried adhesive, mechanical means such as sanding scraping, or chiseling are necessary. To clean the surface while the Epoxy Putty is still wet/uncured, wipe the area with soap and water, Acetone, or Isopropyl Alcohol (IPA). Clean up: Remove any excess material before hardening. ![]() Wear a dust mask and protective eyewear when sanding or drilling cured product. It takes 24 hours for the Epoxy Putty to be fully cured. The epoxy needs 10 minutes to set and is paintable after 1 hour.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |